News Blog

Home // News // News Blog

Xilence unveils: Sneak preview of the new multi-socket high-performance cooler M612 Pro at Planet3DNow!

01.02.2011

The new member of Xilence cooler family is the M612 Pro. It was designed in order to meet the high performance and quality standard requirements and to set new standards in the cooler segment. The new CPU cooler should be extremely powerful, as well as operate very silently. The Xilence developers managed to accomplish this, because according to the review of the online magazine Planet3Dnow! the M612 Pro leaves its cooling competitors confidently far behind. The twelve heat pipes and the particularly silent running of the 140mm 2CF fan ensures for an enjoyable working environment even under extreme conditions.

Planet3Dnow!: "The goal to bring a high-performance cooler on the market where the competitors are anxious and scared was achieved successfully. While the performance is rather average at low TDP values, the Xilence M612 Pro can really show what it can do and why it was developed at 125W TDP. According to all models that were tested in the 125-W-TDP category, the Xilence M612 Pro was one of the top models when tested at full speed. Even when running at full speed, the M612 Pro it is not very loud which can be seen by the volume measurements of 40.2 db (A) at a target temperature of 55° C.”

The new cooler will be available in the first quarter of 2011. The suggested retail price (MSRP) is 59.90 €.

0 Comments // 0 Trackbacks

Xilence gets off to a good start in 2011

18.01.2011

Hanover-Laatzen, 18.01.2011 – Xilence, global acting manufacturer of PC cooling solutions and power supply units, will start the New Year with new innovated products.  

Xilence starts the New Year well prepared with new coolers, an iPad stand and the new power supply revision 3.1. At the beginning of the year, a new flagship cooler - M612 PRO – will expand the Xilence high-end cooler range. This new tower cooler creates a balance between silent cooling, easy installation and maximum compatibility. The special design of the M612 removes dangerous hotspots underneath the heat sink and thereby the greatest weakness of conventional tower coolers. The cooler can manage this due to the 140mm 2CF fans that protrude on both sides. As a result, the voltage converter and other surrounding components are well cooled. In addition to the M612 PRO, the M608 PRO will also appear in the New Year. This top-flow cooler is barely higher than a graphics card and is therefore particularly suitable for flat cases. A 120mm fan from the 2CF series generates the necessary wind.

The Xilence iPad and tablet PC stand "X1" has a firm grip on things! With the stand, you can lock the handheld device firmly on the table and use it as a monitor. The height and angle can be freely adjusted to make any working position comfortable.

All Xilence power supplies will be updated to the revision 3.1 in the course of the year. In addition to the technical innovations, the number of cables and connectors will be adapted to current needs. Also in terms of noise, the new power supplies have been further improved. Depending on the series, the new PSUs will have an innovated silent fan. Furthermore, all gaming and modular series PSUs will receive a new air duct that will direct the cold air exactly there where it is needed to prevent the overheating of components.

0 Comments // 0 Trackbacks

Xilence T800 ensures for a relaxed working environment

07.08.2010
Xilence introduces the individually adjustable notebook coolers

Hanover-Laatzen, 07/08/2010 - Xilence, German-Chinese specialist for the cooling and noise reduction of PCs, introduces their new individually adjustable T800 notebook coolers.

The T800 Xilence notebook cooler pursues an entirely new concept. Not only does it effectively cool the notebook, but it additionally optimizes the screen position and handling. The T800 allows you to freely adjust the tilt angle along with the screen height. The elevated screen position improves your posture considerably when sitting in front of your PC which ensures for a relaxed working environment. Your wrists can rest comfortably on the angled keyboard position.

Two 80mm fans provide the bottom of the notebook with fresh air which cools the notebook and ensures that the components will have a longer life. The fans are conveniently powered by the USB port which means an additional power supply is not necessary.

The cooler is suitable for notebooks up to 39.1 cm (15.4 inches).

0 Comments // 0 Trackbacks

Xilence High End Coolers and flexible fans are now available!

20.05.2010
Vibration free wind machines also cool processors

Hanover-Laatzen, 20.05.2010 - Xilence, German-Chinese specialist for the cooling and noise reduction in PCs, introduces the new high performance coolers and also announces the availability of the previously introduced 2CF fan series.



New tower cooler for high-end processors

The new M606 tower cooler has six heat pipes which dissipate up to 150W heat to innumerable fins. The 120mm fan from the new Xilence 2CF series effectively and silently removes the heat. If required, it is possible to mount a second fan and thereby increase the performance even further.

The multi socket makes it possible to place the cooler on almost all sockets and the new brackets simplify the installation considerably.

Also included in delivery are module socket fixings for 775, 1156, 1366 and AM2/AM3. Xilence also provides two plug adapters: an adapter from PWM to 3pin and an adapter from PWM to Big4Pin. The user therefore has many possibilities to connect and control the fan. For a better design, all cables are cable sheathed. Four mounting brackets, illustrated assembly instructions and a tube of thermal paste are of course also included.


2CF Xilence fans are now available

Fans which combine high performance and minimal noise in itself are now more in demand than ever. Often, however, silent wind generators cause despite sophisticated bearing and air flow optimized rotor design an audible sound when installed. The reason for this is not the air turbulence itself, but the vibration of the fan motor which extends to the case. Exactly here is where the new Xilence fan technology begins and prevents that mechanical vibrations are made perceptible as noisy impact sound on the case.

The new 2CF Xilence fans with diameters of 80, 92, and 120 consist of a two-component material mix which together combines the advantages of flexible and solid materials. Fine vibrations of the rotor are effectively damped due to the special rubber compound existing frame. The rubber frame serves as a stable and vibration retardant base for the fan motor. A massive metal bearing shell forms the center of gravity and further contributes to the fact that imbalances can be avoided.

The 7 to 13 volt operating motor accelerates the air flow optimized rotor blades to a maximum of 1500 RPM and creates an air flow rate of 66.3 CFM (ca.111m ^ 3 / h). The vibration-free fan is mounted with special rubber decouplers - disturbing impact sounds are a thing of the past.

Xilence granted a five year warranty to the new fan series. The new 2CF Xilence fans and the new M606 coolers are now available. As a consequence, the next revision of the 4All.R3 Xilence CPU coolers has this new fan technology. They are now available as Xilence M604.

1 Comments // 0 Trackbacks

Xilence introduces the new SFX power supplies

04.05.2010
High-efficiency technology within a compact case

Hanover-Laatzen, 04.05.2010 - The German-Chinese manufacturer Xilence expands its product range by two high-efficiency SFX models.

Small, highly efficient and silent PSUs are in times of HTPCs and super compact PCs always in demand.

The new SFX Xilence 250W power supply is 80Plus Bronze certified and the 200W model is 80Plus Standard certified. Due to the high efficiency, both power supplies remain even at a high load pleasantly silent. The new power bundles even stay at a full load discreetly in the background and achieve a maximum noise level of only 0.4 sone. In addition to the actual power supply, there are normal screws, four thumbscrews and cable ties included in the package.

The fan control is responsible for the silent and efficient cooling. The fan control automatically adjusts the fan speed to the power supply temperature and transports the warm air out of the case at the same time.

The power supply is available from mid-June.

0 Comments // 0 Trackbacks